USDA NASS Monthly Report

Cattle on Feed Report: Latest Numbers and How to Read Them

The Cattle on Feed report is USDA’s monthly count of cattle in U.S. feedlots with 1,000 or more head of capacity: how many are on feed, how many were placed during the month, and how many were marketed for slaughter. The latest figures are below and update automatically each time USDA publishes. The rest of this page covers how to read them against the plan you already have for your cattle.

See the Latest Numbers

Key Takeaways

  • Placements are the number to watch. Cattle placed this month become fed cattle roughly four to six months later, which makes placements the earliest read on future fed cattle supply.
  • The market tends to react to surprises, not totals. A release reads as bullish or bearish against pre-report trade estimates, and because it lands after the CME close, the reaction shows at the next open.
  • Placements are also the noisiest figure. Weather and pasture move them and USDA revises the prior month, so read the trend across several releases.

What Does the Latest Cattle on Feed Report Show?

Cattle on Feed - key figures and summary
Cattle on feed (head)
11.59M Nov 1 2026
Cattle on feed - % of last year
99% Nov 1 2026
Placements (head)
1.89M Oct 2026
Placements - % of last year
92.7% Oct 2026
Marketings (head)
1.62M Oct 2026
Marketings - % of last year
95.4% Oct 2026

Data as of 2026-11-20 · Source: USDA NASS

Latest Release Summary

USDA counted 11.59M head of cattle on feed in feedlots with 1,000 or more head of capacity as of the latest release, 99% of the year-earlier level. Placements during the month totaled 1.89M head, 92.7% of a year earlier. Marketings totaled 1.62M head, 95.4% of a year earlier.

Placements at 92.7% of last year mean 1.89M head entered large feedlots during the month. When that shows up as fed cattle supply depends on placement weights and future marketings, covered below.

Every figure in the cards above comes straight from the USDA NASS release: head counts and percent of last year, as published.

Percent of last year is the comparison that carries the most information, because it compares like months. Placements swing hard through the year with calf weaning, wheat pasture and weather, so a big jump from one month to the next is often just the calendar. A big move against the same month last year is not.

Most cattle on feed sit in a handful of states, led by Texas, Nebraska and Kansas, so a national surprise often traces back to one or two of them. Drought or pasture conditions in one region can move the national placements number on their own. The state tables in the full release show where the change came from.

For every figure in the release, including state detail, see the full Cattle on Feed report on the AgOptimus Reports Hub. The source data is published by USDA’s National Agricultural Statistics Service.

The chart below tracks placements as percent of last year across the last 12 releases. Below the 100% line, feedlots placed fewer cattle than in the same month a year earlier; above it, more. A run of releases on one side of the line says more than any single month.

Placements - % of last year100% = same as last year
92.7%
Source: USDA NASS · Nov 1, 2025 to Oct 1, 2026

The next Cattle on Feed release is scheduled for Friday, December 18, 2026 at 3:00 PM ET.

Open the Full Report

What Does This Report Mean for Your Cattle?

Cow-Calf and Backgrounders

Placements are the monthly read on feedlot demand for the calves you sell, and on the supply your calves will meet at your sale date.

Feedlot Operators

Placements, weights and marketings shape the fed cattle supply yours will compete with, and two of the inputs to your feeding margin.

Discuss Your Cattle Marketing Plan

Why Do Placements Matter Most?

Placements matter most because they are the earliest available read on how many fed cattle will reach packers four to six months from now.

A calf placed this month at 600 pounds spends longer on feed than a yearling placed at 900 pounds, so the weight mix decides when that supply shows up. USDA breaks placements into six weight groups in the full release, from under 600 pounds to 1,000 pounds and up, which is how you tell whether this month’s placements land at the front or the back of that window. Four to six months covers most cattle; light calves can stay on feed longer than six months and heavy yearlings can finish in about three.

That timing maps onto the board. Live cattle futures list February, April, June, August, October and December contracts, and feeder cattle futures list January, March, April, May, August, September, October and November. Heavy cattle placed in August finish around the turn of the year, so they line up with the December live cattle contract. Light calves placed the same month finish closer to late winter, so they line up with February and April. Heavy placements bear on nearby contracts; light placements bear on deferred ones.

Placements also measure something happening right now: feedlot demand for feeder cattle. Every head placed is a head a feedlot bought or moved off grass.

So placements cut two ways at once. They are demand for feeders today and supply of fed cattle later. That is why one release can look like good news to a cow-calf operator and bad news to a feedlot.

Placed this month, marketed months laterApproximate months on feed by placement weightUnder 600 lb600 to 699 lb700 to 799 lb800 lb and up012345678Months after placementTypical marketing windowApproximate. Varies with ration, sex and target weight. For educational purposes only. Not trading advice.
Lighter cattle stay on feed longer, so the weight mix in a placements number decides when that supply reaches packers. Ranges based on average steer days on feed by placement weight, as cited in University of Nebraska Extension EC850.

How On-Feed, Placements and Marketings Fit Together

The three headline numbers are one inventory and two flows: cattle on feed at the start of the month, plus placements, minus marketings and other disappearance, equals cattle on feed at the start of the next month.

Think of it as a grain bin. What’s in the bin on the first of the month, plus what you augered in, minus what you hauled out and what you lost to shrink, is what’s in the bin on the first of next month. Placements are the auger. Marketings are the trucks. Other disappearance is the shrink: death loss, cattle moved back to pasture, and cattle shipped to other feedlots for further feeding.

USDA also reports net placements, placements minus other disappearance. It is the number that shows how much the bin actually took on during the month, after the shrink.

Start count + placements - marketings - other disappearance= next month's cattle on feedCattle on feed1,000+ head feedlotsstart-of-month countPlacements infeeders bought ormoved off grassMarketings outfed cattle soldfor slaughterOther disappearancedeath loss, pasture, other feedlotsFor educational purposes only. Not trading advice.
The report works like a grain bin: what's in it, plus what went in, minus what went out.

Read the flows against each other, not one at a time:

  • Net placements running below marketings means the bin is draining. Fewer cattle are going in than coming out, and the on-feed count falls over the following months.
  • Net placements running above marketings means the bin is filling.
  • Marketings running behind last year while the on-feed count runs ahead can mean cattle are staying on feed longer. Heavier carcass weights would confirm it; longer feeding adds pounds of beef even when head counts don’t change.

Before comparing marketings with last year, check the calendar. A month with one fewer slaughter day posts a smaller total even when the daily pace hasn’t changed, which is why University of Nebraska extension work compares marketings per slaughter day.

The trade reads marketings against the on-feed count to judge currentness: how caught up feedlots are on selling finished cattle. The report has no official days-on-feed figure, so the trade infers it from marketings, inventory, placement weights and carcass weights. Current feedlots can pass on a weak packer bid. Feedlots backed up with heavy cattle have less room to wait. A large on-feed count alone doesn’t settle which one the industry is in; the pace of marketings does.

Heifers on Feed: The Earliest Read on a Herd Rebuild

The heifer share of cattle on feed is one of the earliest reads on whether producers are rebuilding the herd: fewer heifers on feed can mean more are being kept for breeding.

Four times a year, in the January, April, July and October releases, USDA also splits cattle on feed into steers and heifers.

A heifer in a feedlot is a heifer not being kept for breeding. When the heifer share of cattle on feed rises, it points away from a herd rebuild. When it falls, it can mean producers are holding heifers back, one of the earliest possible signs a rebuild has started. Confirm it against the Cattle Inventory report and cow slaughter before reading it as a turn in the cycle.

In the latest quarterly breakdown, heifers made up 37.8% of cattle on feed, 4.30M head, 98.7% of a year earlier. The chart shows the share across recent quarters.

Heifers - share of cattle on feed
37.8%
Source: USDA NASS · Jan 1, 2024 to Oct 1, 2026

USDA’s latest Cattle Inventory report put the beef cow herd at 28.45M head, 99.3% of a year earlier. For the full herd picture, see the USDA Cattle Inventory report on the Reports Hub.

Every heifer goes one of two waysHeifer calvesKept for breedingGrows the cow herd. More calves later.Placed on feedBeef now. No future calves.A falling heifer share may be an early sign of a rebuild; confirm it with other herd data. Educational only.
Heifers placed on feed are heifers not kept to grow the herd.

Was the Cattle on Feed Report Bullish or Bearish?

Whether a Cattle on Feed report reads as bullish or bearish depends on how its figures compare with the trade’s pre-report estimates, not on whether the numbers rose or fell from last year.

Before each release, news services survey market analysts and publish an average estimate and a range for each figure, stated as a percent of last year. If placements come in at 95 percent of last year and the trade expected 92 percent, the market treats that as more cattle than expected, even though placements fell from a year ago.

A real case: in the June 2024 report, USDA put May placements at 104.3 percent of a year earlier, above the top of the trade’s published estimate range of 95.0 to 102.4 percent, as reported by DTN. Every analyst surveyed had expected fewer cattle than USDA counted. The chart below shows how that kind of gap works.

What the market reacts to: the gap, not the totalHypothetical placements release, shown as percent of last yearTrade estimate rangeTrade average 92%USDA actual 95%Same as last year3-point surprise88%90%92%94%96%98%100%Placements fell from a year ago, yet the market sees more cattle than it expected.Hypothetical illustration for educational purposes only. Not a forecast or trading advice.
The market prices the gap between the release and expectations, not the change from last year.

Positioning matters going in, too. In the latest weekly CFTC Commitments of Traders report, which reflects positions as of the prior Tuesday, managed money held a net position of +43,321 contracts in live cattle and +9,673 in feeder cattle. A heavily positioned trade has further to unwind when a release surprises. See the Commitments of Traders report on the Reports Hub.

Two practical details follow from the release time:

  • The reaction shows at the next open. Because the report comes out after CME cattle futures close, anything carried into a Friday release carries the gap between Friday’s close and Monday’s open.
  • Daily price limits apply. Feeder and live cattle futures have daily price limits that cap how far they can move in one session, and CME resets those limits periodically. See trading hours and CME’s current contract specifications for today’s figures.

AgOptimus does not call reports bullish or bearish on this page. Whether a release helps or hurts depends on your cattle, your marketing dates and what you already have covered. That is a conversation, not a headline.

Sizing a One-Point Miss on Placements

A one-percentage-point miss on placements equals one percent of the year-earlier placement total in head, because estimates and results are both stated as percent of last year. If the same month last year placed 1.8 million head, a one-point miss is 18,000 cattle.

Here is what that looks like in pounds and contract terms. The figures below are a hypothetical illustration of scale and contract arithmetic, not a trade example or an outcome.

Feeder stage Finished stage
Head (1% of a 1.8 million-head year-earlier month) 18,000 18,000
Assumed weight per head 800 lb 1,400 lb
Total pounds 14.4 million lb 25.2 million lb
Contract size Feeder cattle (GF): 50,000 lb Live cattle (LE): 40,000 lb
Pounds expressed in contracts 288 GF contracts 630 LE contracts

“Pounds expressed in contracts” is a way to picture size. It is not open interest or a forecast of trading.

A one-point miss is a modest surprise by Cattle on Feed standards, and it still represents the pounds equivalent of hundreds of contracts: more or fewer cattle than the trade expected. It measures volume, not positioning or trading. That is why the gap against estimates tends to matter more to price than the headline number, alongside positioning and whatever else the market is trading that day.

What any price move means for a position comes down to contract size. The arithmetic works the same in both directions:

Feeder cattle (GF) Live cattle (LE)
Contract size 50,000 lb (500 cwt) 40,000 lb (400 cwt)
Minimum tick $0.00025/lb = $12.50 $0.00025/lb = $10.00
Value of a $1.00/cwt move $500 per contract $400 per contract

A $1.00/cwt move is $500 per feeder cattle contract whether it moves for you or against you. For what it takes to hold a position, see margin requirements.

Hypothetical illustration for educational purposes only. Not a recommendation or a representation of any actual result.

How Report Risk Shows Up in Options on Futures

Options on live cattle and feeder cattle futures price the risk of a report before it lands: premium tends to build into a scheduled release and come out of the market once the number is known.

An option’s price includes the market’s estimate of how far futures could move before it expires. A scheduled release is a known source of movement, so that estimate, implied volatility, tends to rise ahead of it. Once the figures are out, the uncertainty they carried is gone. Research presented at the NCCC-134 conference found implied volatility in short-dated options generally falls after USDA releases; that study covered crop reports, and the same mechanism applies to any scheduled release.

Two features of cattle options are worth knowing:

  • Puts have historically cost more than calls. A study of livestock options found a persistent skew: out-of-the-money puts on cattle futures have been more expensive than calls the same distance from the market. The same study found little evidence that the pre-report skew predicted which way live cattle futures moved after USDA reports. Option prices describe the market’s worry, not its forecast.
  • Expirations can now be lined up with releases. CME lists serial-month and weekly options on live cattle futures. A weekly option that expires after a Cattle on Feed release carries that release’s risk; one that expires before it doesn’t.

The mechanism cuts both ways. Buying an option ahead of a release means paying for the uncertainty it carries; if the figures land close to expectations, that part of the premium can fade even when futures barely move. Selling an option ahead of a release means collecting that premium and carrying the risk of a surprise.

The after-close release matters for stop orders, too. A resting stop can’t act until the next session opens. If futures open beyond the stop price, a sell stop becomes a market order and fills at the next available price, which can be well below the stop price. For an option buyer who holds the option, the most that can be lost is the premium paid, whatever the open does. Exercising it turns it into a futures position, with futures risk.

Options on futures involve risk and are not suitable for every operation. Educational only, not a recommendation. Which tools fit depends on your cattle, your marketing dates and what you already have covered.

Why Does the Market Sometimes Ignore the Report?

The market often moves little on a Cattle on Feed release because the figures are survey estimates that get revised, placements are the least reliable number in the report, and the trade has usually priced most of the information in before the release.

  • The numbers are estimates. USDA notes that monthly survey figures are subject to sampling variability, and each release revises the prior month. A placements figure that looked like a surprise can shrink a month later.
  • Placements move for reasons that aren’t demand. Drought pulls calves off pasture early. Wheat pasture graze-out timing shifts spring placements. Winter weather delays shipping. A placements surge can be weather rather than appetite.
  • Other numbers move faster. In the short run, weekly cash fed cattle trade and boxed beef prices often drive cattle futures more than a monthly inventory count does.

Read Cattle on Feed as a trend across several releases. One month rarely settles anything.

What Does the Cattle on Feed Report Mean for Your Operation?

What a Cattle on Feed release means for you depends on whether you sell feeder cattle, buy them, or both.

If you run cow-calf or background cattle, you sell into feedlot demand. Placements are the clearest monthly read on that demand. Feeder cattle futures settle to the CME Feeder Cattle Index, which is built from cash feeder cattle sales, so the futures price and the market for your calves are tied together.

If you feed cattle, you buy feeders and sell fed cattle, and the report touches both sides of your margin. This month’s placements are other feedlots’ cattle that will compete with yours for packer bids four to six months out. Your margin is the fed cattle price minus feeder cost, feed and yardage, and the report bears on two of those inputs at once.

Same release, two readings. Example: placements come in above trade estimates.

Cow-calf or backgrounder

Reads as more feedlot buying of the cattle you sell.

Feedlot

Reads as more cattle competing with yours for packer bids four to six months out.

Neither reading is a forecast. Which one matters more depends on your marketing dates and what you already have covered.

The feeding margin calculator below runs that arithmetic for one head. Enter your own feeder cost, finish weight, feed and other costs, and switch between cattle and hogs. As a reference point, a 1,450 lb steer is 14.5 cwt, so every $1.00/cwt change in the fed cattle price moves revenue by $14.50 a head, and a $5.00/cwt move is $72.50 a head in either direction.

The report can’t tell you what any of this means for your own cattle. That depends on things only you know:

  • When your cattle are marketed relative to the supply window the report describes
  • Their weight and class
  • What price exposure you already have covered, through futures, options, Livestock Risk Protection (LRP) or a forward contract. The LRP coverage helper runs the numbers on LRP.
  • Your local basis history
  • How much margin volatility your operation can carry through a bad stretch

Talk it through with a broker

For the weekly routine around this report, see our guide to cattle and feeder market reports. Our guide to the COT report and the WASDE report on the Reports Hub cover positioning and feed costs, the other two sides of a cattle margin.

Cattle on Feed Report FAQ

What is the Cattle on Feed report?

The Cattle on Feed report is a monthly USDA survey of feedlots with 1,000 or more head of capacity. It counts cattle on feed at the start of the month, cattle placed into feedlots during the prior month, and fed cattle marketed for slaughter. It is published by the National Agricultural Statistics Service (NASS).

When is the Cattle on Feed report released?

USDA NASS releases the Cattle on Feed report monthly, generally on a Friday in the third or fourth week of the month at 3:00 p.m. Eastern. Exact dates are set on the NASS release calendar each year, so check the calendar rather than assuming a fixed day.

What are placements in the Cattle on Feed report?

Placements are cattle moved into feedlots during the month to be fed for slaughter. They are the earliest read on fed cattle supply four to six months later and a direct measure of feedlot demand for feeder cattle today.

What does percent of last year mean in the report?

Percent of last year compares a figure with the same month a year earlier. A placements figure of 95 percent means feedlots placed 5 percent fewer cattle than in the same month last year. Because it compares like months, it removes most of the seasonal swing in placements and marketings.

Where do the figures on this page come from?

The Cattle on Feed figures come from the monthly USDA National Agricultural Statistics Service release and are shown as published: head counts and percent of last year. The herd figure comes from the USDA Cattle Inventory report, and managed money positioning comes from the CFTC Commitments of Traders report. All of them update automatically when the source publishes.

Does the Cattle on Feed report count every animal on feed?

No. The monthly report covers feedlots with 1,000 or more head of capacity, which hold most but not all cattle on feed in the United States. NASS surveys all known feedlots of that size in 17 states, which account for 98 percent of cattle on feed in such feedlots. Smaller feedlots are captured in separate annual and periodic USDA estimates.

How does the Cattle on Feed report affect feeder and live cattle futures?

Placements and on-feed counts shape expectations for future fed cattle supply, which live cattle futures price, and for feedlot demand for feeder cattle, which feeder cattle futures price. How futures react depends on how the figures compare with pre-report trade estimates, not on the figures alone.

How does the Cattle on Feed report affect options on cattle futures?

Options on live cattle and feeder cattle futures tend to price the report in advance: implied volatility, the part of an option’s premium tied to expected movement, tends to rise before a scheduled release and fall once the figures are known. An option that expires after the release carries its risk; one that expires before it does not.

Published by AgOptimus. Last updated October 20, 2026. Figures on this page update automatically with each USDA release.

See Every Figure

State detail, charts and every number in the release, updated automatically.

Open the Full Report

Does this month’s report change your plan?

An AgOptimus broker can walk through how the latest release lines up with your marketing dates and what you already have covered. You decide what, if anything, to do.

Talk it through(800) 944-3850

Get Started

Read the Report With Someone Who Knows Your Operation.

Talk to a broker about what this month's numbers mean for your cattle, your marketing dates and what you already have covered.

Talk to a Broker